Guide Star Catalog with indi_simulator_ccd driver - by: berendj
Hello, I am completely new to astro photography so I wanted to train myself by using the simulators via KStars and EKOS. In order to receive images from the simulator, I set my GSC up according this...
View Articleproblem atik efw v2 - by: fm
Is there some configuration (udev rules...) to tweak with to use an atik filter wheel (see output of dmeg below) ? I tried it on 3 machines to no avail using atikccd-1.24-amd64.deb and/or...
View ArticleHow to run Git and PPA versions on same RPI3 - by: maudy
Is there anything special to do to run Kstars from git under one user, and from PPA under another user?
View ArticleFeature request; adding mosaic jobs - by: supernov
Yes, I can add a mosaic job just fine and it works a treat! But, would it be possible to make a mosaic job in the scheduler, then another one and have it added to the scheduler list? Now it just...
View ArticleMosaic job and PHD2 not resuming - by: supernov
Maybe this has been fixed already, but I just now noticed that PHD2 wasn't resumed when the second panel started.
View ArticleRESOLVED - Not sure why clicking connect makes Kstars exit - by: maudy
Setup: LiteCrawler, ASI174, ASI1600, ASIEFW and CGEM. Please find attached the logs duplicating this a few times. Image attached is the config used. SYMPTOM: start indi, click connect, KStars closes....
View ArticleClik here to view.
Mosaic job; Alignment failed, too many open files error - by: supernov
Sorry for all the stuff I'm encountering. Again with the mosaic job and I noticed 2 things; 1. I selected to run each job twice, after the first successfull run a dialog popt up telling me it couldn't...
View ArticleEQTOOTH - by: astro31
Hello , EKOS doesn't detect my bluetooth EQTOOTH www.pierro-astro.com/materiel-astronomiq...rface-eqtooth_detail Please could you help me in order to use my EQ8 by this Bluetooth adaptator ? Thank you
View ArticleKstars crashing when in night vision mode - by: gbeaton
This happened to me a few times last night. I was using night vision mode and decided I couldn't read the screen properly so I tried to return to "moonless night" and each time Kstars crashed. I'm...
View ArticleGuiding lost while downloading CCD image - by: gbeaton
I noticed that the guider function would regularly have to retry to capture from the guider. This coincided with the download of the main CCD image - via StellarMate Wifi. This could knock the guiding...
View ArticleFocus Module focusing on a black hole! - by: gbeaton
I raised this point again because its shown up both in the guiding module and the focus module. Both are selecting the core of the Andromeda when auto star selection is selected.
View ArticleWarn when focus is off - by: gbeaton
Can the focus module monitor and report focus even though I don't have a focuser. I'd like to have it analyze each image from the capture module and warn if the focus is off.
View Article"Solver failed. Try again." with ekos on OSX. - by: abhoriel
Hi, I'm having problems using the plate solver with Ekos. I'm using the OSX kstars available for download on the kstars website (KStars Version 2.8.3). The same issue happens regardless of whether I...
View ArticleMoving Ekos to another SDCard - by: maudy
Is there an easier way to recreate an Ekos/Kstars setup on a new install? This link suggestion copying user.sqlite: indilib.org/forum/ekos/2602-simulator-pr...removable.html#19662 Is this the only file...
View ArticleClik here to view.
kstars visual and eqmod mount slowly drift away from each other - by: xsnrg
Over the course of a long set of exposures, in this case, 150 x 30s of the cocoon nebula, the pointer for the eqmod mount slowly drifts away from what is actually being captured. In the case of the...
View ArticleSome Items from two nights... - by: maudy
1. **HELP**: The scheduler would not let me start IC1805 until 35 degrees. There seemed to be no way to overide it; it was at 33 degrees, sigh. The altitude check was not enabled in the schedulder, and...
View ArticleQHY9 & QHY23 odd behaviour (=not working) - by: HoHr
Updated indi on both laptop and RPi3 (Ubuntu Mate 16.04) recently and on QHY9s doesn't work cooling (first it gave some unrealistic temperature in millions of degrees) and exposure, but without...
View ArticleBresser Exos Goto? - by: Platone
Hello, A friend of mine has bought a Bresser eq5 GoTo mount, which is controlled by an Exos 2 handset. Is it possible to control it using the PC? The manual says that there is an RS-232 connector, but...
View ArticleMissing ASI dependeny asi-common? - by: Dutchastro
Hi All, Just upgraded INDI on my pi and now ASI equipment fails to work, see below the error messages when installing the drivers. Can anyone please tell how to install the dependency?...
View ArticleDependency issue ASI equipment on pi - by: Dutchastro
Hi, Just updated INDI drivers and alls asi equipment stopped working, looks like a dependency issue. Can anyone please help to correctly install the dependency? dpkg: dependency problems prevent...
View Article