Flats and ADU values in KStars versus PixInsight - by: supernov
I might be doing something wrong here, but when I take DSLR-flats using EKOS, I transfer the frames to the client via FITS. I check what the value is (in this case around 7500 for the red channel) in...
View ArticleMoonlight focuser and rotator - anyone using with RPI3 - by: maudy
Does anyone use the Moonlight focuser and rotator with an RPI3? I am considering getting a moonlight and focuses; however, if it does not work well with INDI on RPI3 I will hold off for now. Thank you
View ArticleCan't find latest RPI tar file on my Pi - by: crose01
When I run $ tar -xzf libindi_1.4.1_rpi.tar.gz it can't find the file
View ArticleZWO CCD Config not saving - by: Ihoujin
Using ASI 120MM. Changes made to this driver are not getting implemented after restarting kstars. For example I change Gain from 20 to 40 and Telescope form Primary to Guide, then save. But the changes...
View ArticleClik here to view.
Do it yourself focuser: which one? - by: luca.gervasi
Hello, i have a crayford 2" hand focuser witch 1:8 reduction gear (standard skywatcher's focuser) I'd like to remote control. My first idea was to use a moonlight packaged autofocuser but... it costs...
View ArticleHitecastro Mount Hub Pro Compact - by: giorgio_ne
I've purchased an Hitecastro Mount Hub Pro Compact from www.hitecastro.co.uk and I'd love to use it in Indi. This device is the Compact version of its popular bigger brother and it includes: a...
View ArticleGitHub Fork - by: oopfan
Jasem, Last night I downloaded Registax6 and discovered that it did not recognize the ColorId of 100 that the V4L2 INDI driver writes when I capture color. Monochrome is recognized. At this point in my...
View ArticleSecond USB webcam doesn't work - by: JustMakeIt
Hello, I'm moving my setup from Windows to Ubuntu 16.04 on an HP laptop that has a built-in camera. I'd like to use Kstars/Ekos at least to autoguide, but connecting a second webcam to a USB port ( a...
View ArticleEKOS scheduler feature request. - by: dokeeffe
A small feature to add to the backlog.... What: As an observer with many targets, I would like the Ekos scheduler job name to be added to the fits header. Why: I'm generating Ekos schedules from...
View ArticleUse RA / DE Backlash config not saving in EQMod. - by: Ihoujin
When I restart the INDI server, the toggles for using RA and DE backlash settings reset to disabled in EQMod Driver. They do not appear to get saved with the configuration.
View ArticleUsing two cameras at the same time? - by: kecsap
If I understood correctly, it is not possible to run an imaging session with two cameras at the same time, right? (The Sequence Queue on the CCD tab can't run two tasks parallel.)
View ArticleViewing/converting FITS files from QHY camera - by: kecsap
Hi, I look forward for sorting QHY camera images after a session is finished. The same thing can be done with cr2 images from my Canon DSLR with gwenview, but I have problem with the QHY images....
View ArticlePossible flat calibration issue... - by: maudy
Hi, Is there a known issue with flat calibration and setting the time to infinity? It is not clear why it happens. Steps to recreate: 1. Set sub to Flat 2. Set ADU to 12000 3. Set exposure to 1 sec 3....
View ArticleClik here to view.
clean the sensor - by: pcxz
Yes online is disponible much guide/info/ecc.. I read all possible, anyone in this forum have proper system for cleaning ccd sensor ( in my case of two DSLR )? I use: optical wipes pump canon Not...
View ArticlePolynomial solution in focus module - by: mlarsson
Hi! I just recently noted that I now can choose a polynomical solution, versus an iterative solution in the focus module. I guess this is new, because I haven't seen it before. So I just wanted to say...
View ArticleAutofocus Wishes - by: rockstarbill
Just wanted to record a few things the focus routine may be improved with. 1. Setting for exposure time per filter for focusing. Useful for narrowband versus broadband. 2. Option to median/mean the...
View ArticleHorizon limits: scope outside limits. Nothing to abort - by: astropaul
Hi all, I'm going to use kstars+indi in order to manage my mount, an Eq6 pro. Under INDI control panel --> Horizon, I tried to set the Altitude to 20:00:00, but after that on log tab the message :...
View ArticleASI CCD Driver Issue - by: rockstarbill
Hey guys, Went to connect up to do some testing, and I ran updates prior to doing so. After I updated and started INDI, my ASI CCD Cameras no longer connect, they just sit there in a yellow state...
View ArticleClik here to view.
Ten Steps to Getting Off ASCOM - by: rockstarbill
Thought you guys might enjoy this. A friend of mine asked for a list of things he would need to do in order to move to INDI, so I wrote them up, and realized other people could probably use this to...
View ArticleGuiding wit PHD2 but fits viewer displays guide image? - by: mlarsson
Hi! I regularly use PHD2 for guiding, and it works nicely together with Ekos. However, recently the guide image pops up in the Fits viewer, despite using PHD2. This is quite annoying as I cannot close...
View Article