Issues Configuring Toolbars - by: Ihoujin
I am trying to configure my toolbars with some added icons, but the changes aren't getting applied. Any thoughts?
View ArticleClik here to view.
Difficulties With Dithering - by: feilimb
I have not been successful in getting dithering to work with my Ekos / Indi system (Raspberry Pi 3). My guiding camera is a QHY5LII Mono, and I have a ST4 cable connected from the camera to the guiding...
View ArticleINDI ASCOM DIY Arduino Focuser - by: rlancaste
So a friend of mine is building his own focuser for his imaging rig. He is planning to use an Arduino Nano using the ASCOM driver "Arduino ASCOM Focuser Pro DIY"...
View ArticleGPhoto/Canon Driver crashing with FITS - by: Ihoujin
I noticed tonight GPhote CCD and Canon DSLR drivers began to crash when receiving images captured in FITS. They still receive Native format images just fine. FITS images captured with ZWO CCD are fine....
View ArticleClik here to view.
Lodestar driver not connecting - by: supernov
So, something new every time. This time I can't get my Lodestar to connect, first I thought either my USB cable was bust or the guider itself, but I fired up Windows and that worked perfectly fine. So...
View ArticleStarlight CCD Crash & AO Crash - by: escriban
I suppose indilib is undergoing some deep changes, isn't it? It is my only explanation for the the following new quirks, I'm experiencing with the latest build of Indilib. 1. "indi_sx_ccd" gets down...
View ArticleHow to set up Shoestring Astronomy BT2EQ5 bluetooth adapter. - by: tseckler
This works with a Raspberry pi 3 running Ubuntu Mate 16.04. These are command line instructions in case the pi is headless. 1). In some cases modemmanager interferes with bluetooth operation remove it....
View ArticleEkos crash on Startup on MacOs High Sierra - by: the.cakemaker
Installed Ekos to control my setup remotely on my Imac. It ran on the first startup, but since then it keeps crashing on startup. Is this a known issue? Cheers Niki Gesendet von iPhone mit Tapatalk
View ArticleClik here to view.
Gphoto, Canon 6D, fast exposures - by: supernov
The problem of the exposing busy, can not abort has been solved. Now however it starts to take a 10 second picture, followed by superfast pictures. Those are now succesfully downloaded, but not of much...
View ArticleCapturing Flats: Strange ADU calculated during calibration - by: feilimb
I have been trying to use the calibration section for capturing flats for my Canon 450D. I set a target of an ADU of around 2750, and put in an initial exposure of 0.25 seconds. Whenever I do this...
View ArticleClik here to view.
Troubleshooting lost guide stars - by: schwim
I was asleep and didn't witness it. That's a good thing, right? Nevertheless, it seems I lost the guide star, or at least guiding just stopped working. Ekos aborted guiding and restarted automatically....
View ArticleEkos Site Info doesn't make sense - by: gbeaton
The manual and the mouseover info seem to be in conflict. What site info is being loaded??? the remote computer, the local computer or what I want which is the mount connected to a remote computer?...
View ArticleHEQ5 control - by: gbeaton
I'm raising this issue again because I do NOT want to confuse it with those who use EQMOD. I am NOT using EQMOD. (I just discovered that I do not need EQMOD for computer control of the HEQ5. So last...
View ArticleLosmandy gemini 2 control - by: ajaymandke
Hi, I am relatively new to EKOS/Indi but I have been able to get my current setup working with EKOS/Indi. I recently purchased Losmandy GM811g and waiting its delivery. I want to find out if Gemini 2...
View ArticleEQMOD via Bluetooth hanging KStars - by: nmac
Hi all, the last build of kstars-bleeding is hanging when I try to connect my HEQ5(EQMod) on bluetooth port rfcomm0. It only happens on Kstars, other clients (dcd, skycharts, eqmodgui and CCDCiel) work...
View ArticleIndi_asi and indi_xagyl_wheel not playing nice. - by: Blueshawk
I've been working on an indi compatable diy motorized filter wheel. My unit uses an arduino nano that emulates the xagyl filter wheel usb protocol. It works well when using the ccd and mount simulator...
View ArticleRate Frame Live View - by: Gerard
Hello everybody, I use to set the canon lens focus - with the ASI224 mc using the live view, it is pretty easy but i would like to change the rate of the ASI under the live view, the famous framing...
View ArticleKStars icon missing in my LXDE environment. - by: Ihoujin
My RPi system for KStars/INDI runs Lubuntu, and one minor issue it has is it does not properly display the KStars application icon. Lubuntu has an LXDE environment and KStars is the only application...
View ArticleSesto Senso Focuser not working [Solved] - by: fenriques
I have an issue working with the Primalucelab motor focuser Sesto Senso. After upgrading the firmware to v 2, I tested it under Windows 10 and it worked fine. INDI / Ekos can connect to Sesto Senso but...
View ArticleTracking stops after a slew - by: AtM
Not sure what I am dong wrong, this used to work fine before... Setup is EKOS/KStars/Indi running on a Pi3 (Ubuntu 16.10); EQMod mount (NEQ6) and a Joystick. When all is tracking nicely I get to the...
View Article