I have not been successful in getting dithering to work with my Ekos / Indi system (Raspberry Pi 3). My guiding camera is a QHY5LII Mono, and I have a ST4 cable connected from the camera to the guiding input on HEQ5 mount.
Here are my dithering settings:
![]()
Also, find attached a log file I captured from before a failed dither to after the dither failed (the dither operation seems to fail on every attempt). I am using the internal guider software and not PHD2 / Linguider.
Would anyone have any ideas / tips on how to solve this? Note: I also added a dark calibration frame in the Guiding module to improve the picture quality and guiding itself seems to be working well mostly.
Here are my dithering settings:
Also, find attached a log file I captured from before a failed dither to after the dither failed (the dither operation seems to fail on every attempt). I am using the internal guider software and not PHD2 / Linguider.
Would anyone have any ideas / tips on how to solve this? Note: I also added a dark calibration frame in the Guiding module to improve the picture quality and guiding itself seems to be working well mostly.