Atik 1.6 Driver problem - by: sywong2000

Hi I'm running a Pi3 with ubuntu 16.04 and I've installed the Atik 1.6 driver from cloudmakers. Ekos was able to take an image but the FITS preview never pops up.
I've tried to run the atik ccd test and below shows... Can anyone help? Thanks..
If I rolled back the driver to 1.1 version. It's working fine atik ccd test shows complete and ok...

ubuntu@ubuntu-standard:~$ sudo atik_ccd_test

version 1.6

list

---

-> AtikCamera::list(...)
'Atik 490ex' [0x20e7, 0xdf3a] found...
-> AtikCameraImpl::AtikCameraImpl(..., Atik 490ex, 2)
maxPacketSize = 16777216
<- AtikCameraImpl::AtikCameraImpl
<- AtikCamera::list 1

open Atik 490ex

---

-> AtikCameraImpl::open()
libusb_claim_interface() -> LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED
libusb_set_interface_alt_setting() -> LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED
-> AtikCameraImpl::writeFW()
cpu stopped 1
cpu started 1
<- AtikCameraImpl::writeFW 1
-> AtikCameraImpl::setPortDirection(0, 0x9f)
<- AtikCameraImpl::setPortDirection 1
-> AtikCameraImpl::setPortState(0, 0x80)
<- AtikCameraImpl::setPortState 1
-> AtikCameraImpl::i2cSetTimeout(50)
<- AtikCameraImpl::i2cSetTimeout 1
-> AtikCameraImpl::setParTimeout(50)
<- AtikCameraImpl::setParTimeout 1
-> AtikCameraImpl::i2cSetSpeed(0)
<- AtikCameraImpl::i2cSetSpeed 1
-> AtikCameraImpl::flush()
libusb_bulk_transfer -> LIBUSB_ERROR_TIMEOUT
0 bytes flushed
<- AtikCameraImpl::flush
-> AtikCameraImpl::i2cSetTimeout(5000)
<- AtikCameraImpl::i2cSetTimeout 1
-> AtikCameraImpl::eepRead(3, ..., 2)
-> AtikCameraImpl::i2cWrite(81, [0x00 0x03], 2)
<- AtikCameraImpl::i2cWrite 1
-> AtikCameraImpl::i2cRead(81, ..., 2)
<- AtikCameraImpl::i2cRead 1 [0x3a 0xdf]
<- AtikCameraImpl::eepRead 1 [0x3a 0xdf]
-> AtikCameraImpl::eepRead(1000, ..., 5)
-> AtikCameraImpl::i2cWrite(81, [0x00 0xe8], 2)
<- AtikCameraImpl::i2cWrite 1
-> AtikCameraImpl::i2cRead(81, ..., 5)
<- AtikCameraImpl::i2cRead 1 [0xff 0xff 0xff 0xff...]
<- AtikCameraImpl::eepRead 1 [0xff 0xff 0xff 0xff...]
colour = 1, offsetX = 0, offsetY = 0
pid = df3a
-> AtikCameraImpl::i2cSetTimeout(100)
<- AtikCameraImpl::i2cSetTimeout 1
-> AtikCameraImpl::setParTimeout(1000)
<- AtikCameraImpl::setParTimeout 1
-> AtikCameraImpl::parInit(9)
-> AtikCameraImpl::parInit(...)
<- AtikCameraImpl::parInit 1
<- AtikCameraImpl::parInit 1
-> AtikCameraImpl::ping()
ping -> 100
-> AtikCameraImpl::sendCommand(80, [0x64], ..., 1, 0)
<- AtikCameraImpl::sendCommand 1 NULL
ping <- 148
ping -> 101
-> AtikCameraImpl::sendCommand(80, [0x65], ..., 1, 0)
<- AtikCameraImpl::sendCommand 1 NULL
ping <- 164
ping -> 102
-> AtikCameraImpl::sendCommand(80, [0x66], ..., 1, 0)
<- AtikCameraImpl::sendCommand 1 NULL
ping <- 120
ping -> 103
-> AtikCameraImpl::sendCommand(80, [0x67], ..., 1, 0)
<- AtikCameraImpl::sendCommand 1 NULL
ping <- 34
ping -> 104
-> AtikCameraImpl::sendCommand(80, [0x68], ..., 1, 0)
<- AtikCameraImpl::sendCommand 1 NULL
ping <- 144
<- AtikCameraImpl::ping 0
unlock()
failed to initialize device!!!
<- AtikCameraImpl::open 00
ubuntu@ubuntu-standard:~$