(SOLVED)Moonlite focuser not working properly - by: jonkjon
I have been using a homebrew moonlite focuser clone via arduino. Recently, the focuser has been causing issues where it won't connect unless the telescope is connected. When it does connect, it causes...
View ArticleAstrometry solver finds match, says it failed - by: dziedzic99
This is my output from Allignment card in Ekos. Any ideas how to solve this? No, it doesn't realign telescope nor output these coordinates to "solution coordinates". 2016-07-23T02:27:26 Solver failed....
View ArticleClik here to view.
Odroid C2... will atik CCD work a day ? - by: djibb
Hi all I'm just new owner of a powerfull odroidC2. It's a ARMV8, and is provided with ubuntu 16.04 64 bit (yep...64 bits ) So all opensource stuff is working very well. indiserver/kstars run really...
View ArticleASI driver and BLOB - by: rumen
Hi Everyone! I have ASI 1600 with Ekos and indi over 100Mb ethernet I am getting 8.2 seconds frame download time. the real download time over usb takes 0.8s for USB2 and 0.2s for USB3. in theory it...
View ArticleOn vacation - by: knro
Hey folks! I am on my annual vacation now for 2 weeks and travelling so I won't be able to address any issues until I return.
View ArticleIndiWebManager parsing issue with API - by: Besson
Dear Jasem. I working on apps for my raspberry and meet some issue to parse the reply from the APIs. Replies are provided between braket "[ ]" and my parsing (With libjson0) failed. From the...
View ArticleRASPBERRY Pi 3 and ATIK314L Camera - by: crose01
I have the ATIK314L connected to the Pi and when I access the INDI WebManager on the Pi I don't see the ATIK in the drop downs. I can connect to my EQMOD okay using this method but not the ATIK314L....
View ArticleIs anyone working on PEC training for a CGEM DX? - by: Riprock99
Hello all, I was wondering if anyone has taken on the general task of coding a routine for training permanent periodic error correction (PPEC), or, if not in general, then specifically the CGEM DX....
View ArticleDriver OnStep (LX200 like) for INDI - by: dragonlost
Hello. I would like to use the project "Onstep" to control my mount (GP2 vixen). I have already built a control card and I use a card Arduino Mega 2560 (but you can also use a teensy 3.2 for improved...
View ArticleZEQ25 crashes Kstars loading configuration - by: jonkjon
When I attempt to connect the ZEQ25, KStars crashes. Here is the message from gdb: and this is the backtrace: The crash doesn't occur if I load the configuration before attempting to connect. --Jon
View ArticleNew open project "Ubuntu Astronomy" - by: oleg
So, I began to make the open project "Ubuntu Astronomy" (it is based on Ubuntu 16.04). It contains many astronomical programs from my list. You can see its screen Ubuntu Astronomy v.1.3 What are your...
View Articlemeade DSI 3 - by: yoannick
Hello I am new on your site and I am delighted that much work I have a problem with camera Meade DSI 3 the driver does not load and kstars when I set off Meade dsi he wonder if the firmware is loaded...
View ArticleClik here to view.
experiencing gphoto driver issues - by: djibb
Hi all I'm using a Canon 1100D with gphoto_ccd indidriver. I've got some issues : When I take a shot, the one that appears is the one before... So I'm always at "n-1"... when it's 10s exposure......
View ArticleClik here to view.
KStars Faint Magnitude Limit for Custom Catalogs - by: jonkjon
It would be nice to be able to control the rendering of custom catalog objects as is done for NGC/Messier objects. Perhaps, having the mag limits tied into the FOV as is done in other planetarium...
View ArticleKstars crashes loading configuration - by: jonkjon
When I attempt to connect the ZEQ25, KStars crashes. Here is the message from gdb: and this is the backtrace: The crash doesn't occur if I load the configuration before attempting to connect. --Jon
View ArticleProgramming radio-Buttons, strange behaviour - by: djibb
Hi : ) I'm ending alpyspectrograph driver (to work with this : www.shelyak.com/produit.php?id_produit=92&id_rubrique=17 ) And ther's something I d'ont understand : What I want : That only ONE radio...
View ArticleJMI Motofocus using FCUSB on Jessie rpi - by: lynxsky
I can successfully start indiserver on raspberry pi and then connect remotely from Virtual EKOS on Mac same network. EKOS shows good green connection and rpi shows successful visit, but the speed...
View ArticleGPhoto driver crashes - by: Gorgias
Hello, I have noticed that since I updated INDI on my machines (on saturday for the earliest one), the GPhoto driver always crashes when I try to start it. I have tested with both the Nikon D40X and...
View ArticleLatest INDI build not showing all devices in Ekos - by: phomer60
INDI Library: 1.2.0 Code $Rev$. Protocol 1.7. Raspian on Raspberry Pi 2 Linux astro_server 4.4.13-v7+ #894 SMP Mon Jun 13 13:13:27 BST 2016 armv7l GNU/Linux Followed instructions and built INDI...
View Articlecannot build 3rd party drivers - by: chexmix
Hi all - I purchased a ZWO ASI120-MC-S a couple of weeks ago and have been trying to get it to work on my Slackware Linux box. I successfully build libindi-1.2.0 from source, but when I attempt to...
View Article