Clik here to view.
R-PI and Canon DSLR - cannot open camera? - by: mlarsson
Hi! I've just installed and prepared a Raspberry Pi for remote operation, and it's seems to work very nicely - except for my Canon DSLR. It's connected and found by R-Pi, according to dmesg: [...
View Articleindiserver respawning processes - by: AtM
When I check syslog I see that indiserver is re-spawning a process repeatedly after encountering an error. I have photo and telescope simulator devices activated. What could cause this?
View ArticleRelay/foreward indi to stellarium - by: pauledd
It would be very cool if it would be possible to view a kstars/indi-controlled telescope motion/position in stellarium, something like a "position forewarding". It doesn't need to be controlled by...
View Articleindi_sx_ccd *2? - by: Chris
Hello I am trying to figure out how to connect two SX Lodestar x2 (One is mono and second is Colour) cameras and can not find any information about it beside the one that indi_sx_ccd driver should...
View Articlewebcam / indi_v4l2_ccd get stuck - by: AtM
So DSLR and mount are running nicely on INDI on an RPi2, last thing to get to work is guiding. I use a webcam (PCVC840 acting as SPC900) and the indi_v4l2_ccd driver. PHD2 runs locally on the RPi2,...
View ArticleCapture: Tmp folder on remote machine filled up - by: mlarsson
Hi! I'm running indi remotely on a R-Pi. So the setup is: Raspberry Pi is connected to the telescope and camera, then my laptop connected to the R-Pi (either over wifi or cabled network) (I've got a...
View ArticleClik here to view.
Nova M31 2016-01a, imaged by Ekos and Indi - by: dokeeffe
I'm usually posting questions, queries and problems So I decided to post a success. This is one of the first fully remote images taken from my observatory using Ekos and Indi. Its an extragalactic nova...
View ArticleEQ5 steppers controlled by arduino pro mini - by: starpioneer1988
Hello, first of all I want to thank all developers working on the INDI project, great job. Let me just give a brief description of my Problem: I own myself an omegon 200/1000 telescope on an eq500...
View ArticleClik here to view.
Post your INDI Setup! - by: knro
So while the details can be found in Ikarus Observatory site, I'll kick start this thread with my setup: Odroid XU4 / RPI2 along with gigabit switch, remotely controlled power and digital relay. 1....
View ArticleGPhoto: Connection reset during image transfer - by: AtM
It used to work, but after some HW changes I cannot get an image accross from the DSLR device to the client. I can see it pumping for 10-20 seconds and then the indi server -vv output says: The last...
View ArticleClik here to view.
ZWO ASI120mm crashing kstars - by: dokeeffe
This could be a nasty one.... ASI ZWO camera killing kstars. It happens intermittently, except for tonight where it was happening constantly and after approx 2hours I gave up using the observatory with...
View ArticleClik here to view.
Problem with taking more than 5 subs - by: r00tk1d
Hi, This past weekend I had the first light with my new telescope. I had 2 clear nights so I started my first imaging session. Unfortunately I discovered a new problem, which is that I cannot take more...
View Articleegmod control - by: bmorrelltx
i am just getting started with a EG8 using egmod. I want the mount to find its home position and there are no controls for doing that. When I turn my mount off and come back to it later it does not...
View ArticleClik here to view.
Controlling with a gamepad more than my telescope - by: emk
Hey, I'm not new to programming, but after all couldn't actually say that I'm pretty experienced. INDIlib running with my LX200 GPS works pretty good, also with the gamepad. I'm using a Logitech Inc....
View ArticleSome problems with my RoboFocus - by: gaetan
Hello, Since some times, I've got problems with my robofocus. So I made an all new install of my computer, now is running Kubuntu 15.10, and the last update of Kstars from the PPA. It start, a night I...
View ArticlePlanetary imaging with DSLR and Ekos? - by: mlarsson
Hi! As Jupiter is rising above the horizon here in Sweden, the question of how to take planetary images with Ekos and my DSLRs become interesting. Is there a way to do this? I find no video-mode in the...
View ArticleClik here to view.
Indi server on Odroid-C1 crash the device - by: patdut
Hello all, I come with a new question . I tried to use my "old" odroid-C1 instead of my "new" XU4 to drive my autoguiding camera (ZWO ASI 120MM) and mount (AZEQ6). Why using the C1 instead of my XU4 is...
View ArticleWrong date in fitsheader.. - by: maxer
Hi.. Yesterday's image shows date.. DATE-OBS= '1970-01-01T01:22:00' / UTC start date of observation and a image taken 21/1-16 have a correct date.. DATE-OBS= '2016-01-21T17:11:24' / UTC start date of...
View ArticleKNotification calls from fits viewer crash kstars - by: dokeeffe
It happens intermittently, except for tonight where it was happening constantly and after approx 2hours I gave up using the observatory with nothing captured. <strong>My setup</strong> I'm...
View ArticleCannot connect to remote indiserver device from PH - by: kengs
I'm not sure if this is an INDI problem or PHD2 problem but I'm guessing it is INDI or more likely something I'm doing or not doing in regards to INDI Hoping someone can point me in the right...
View Article