Issue with EOS80D on rpI3 - by: Christian

Hi all,

i have an issue when i use my eos 80d than i don't have with my eos 1000D. When i plug my 1000D on my raspi with latest indi drivers, in remote from my laptop, it's work fine (i use also the latest kstars version). On Indi panel i have the good name (Canon DSLR EOS_1000D) on the tab.
I can use the new liveview mode with at 21 frames/sec, etc. etc... Good !

But, if i plug my 80D, only appear "Canon" on the Indi panel Tab and i have on the eos screen an error 70. the Indi driver connect to my dslr, in the "other" tab i have the good name (Canon EOS 80D) but i can nothing to do. I tryed to set the image and pixel size resolution but that change nothing.

I also tested use my 80D directly, in local, on my laptop. The starting Indi procedure is ok, no error 70 on dslr. I can do a lot of pictures but when i want use the liveview mode, i receive an message that said that : "KStars detected INDI driver indi_canon_ccd crashed. Please check INDI server log in the Device Manager.". I have the same behavior with the 1000D...

why it doesn't work on my rpi ? the USB current power on the rpi is to weak ?

In attach, the file log. Look at line 980, i have a strange message...