Hello folks, I have been following this forum for a while now as I switch from ASCOM to INDI, I am making good progress & I am very grateful for this excellent piece of software and am in awe of the amount of time, skill & effort that has gone into this project.
This is my first post forgive my lack of knowledge in this field, but I have a problem since updating KStars to 2.9.7, all my Raspberry Pi devices and an old Samsung R40 laptop have successfully updated both KStars & INDI Library to 2.9.7 & 1.7.4, however a Lenovo i5 processor Kubuntu 17.10 laptop which has refused to update and is stuck on version 2.9.6 & 1.7.3.
Using the Nightly Builds the Lenovo updates KStars to 2.9.7 but INDI remains at 1.7.3 and my QHY camera will not connect on theRaspberry Pi / Lenovo combination via the INDI Web Manager.
I have tried the following on the Lenovo without success
sudo apt-get update
sudo apt-get install indi-full kstars-bleeding
sudo apt-get update && sudo apt-get -y dist-upgrade
Any help would be greatly appreciated
Alan
This is my first post forgive my lack of knowledge in this field, but I have a problem since updating KStars to 2.9.7, all my Raspberry Pi devices and an old Samsung R40 laptop have successfully updated both KStars & INDI Library to 2.9.7 & 1.7.4, however a Lenovo i5 processor Kubuntu 17.10 laptop which has refused to update and is stuck on version 2.9.6 & 1.7.3.
Using the Nightly Builds the Lenovo updates KStars to 2.9.7 but INDI remains at 1.7.3 and my QHY camera will not connect on theRaspberry Pi / Lenovo combination via the INDI Web Manager.
I have tried the following on the Lenovo without success
sudo apt-get update
sudo apt-get install indi-full kstars-bleeding
sudo apt-get update && sudo apt-get -y dist-upgrade
Any help would be greatly appreciated
Alan