latest INDI/Ekos/Kstars, version 2.8.9 Build: 2017-12-25T02:08:08Z
I am getting disconnects happening that I cannot figure out. I am guiding using the internal guider (finally figured that out - other thread updated). After some time, in this case one 180s exposure in and one about 60s, the mount stops responding to guide commands and stops tracking. I go in to the INDI control panel and hit the disconnect button 2x, and then reconnect and it is back to working, thought the capture session needs to be set up again. Is this something new, or maybe just a cold stiff cable type issue that is pulling on a port? Would it be possible to trap and display the unrecognized error code to help debugging?
2017-12-27T03:55:31: [ERROR] Error when disconnecting mount -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error: -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error when disconnecting mount -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error: -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error when disconnecting mount -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error: -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [INFO] EQMod Mount is offline.
2017-12-27T03:55:31: [ERROR] Error: -> tty read failed, check connection: Timeout error
2017-12-27T03:48:04: [INFO] Telescope slew is complete. Tracking TRACK_SIDEREAL...
2017-12-27T03:48:03: [INFO] Iterative Goto (1): RA diff = 1.48 arcsecs DE diff = 0.05 arcsecs
2017-12-27T03:48:02: [INFO] Slewing to RA: 6:41:56 - DEC: 9:39:37
2017-12-27T03:48:02: [INFO] Slewing mount: RA increment = 1678, DE increment = 3262
2017-12-27T03:48:02: [INFO] Starting Goto RA=6.69899 DE=9.66021 (current RA=6.85556 DE=7.52569)
2017-12-27T03:47:54: [INFO] Telescope slew is complete. Tracking TRACK_SIDEREAL...
2017-12-27T03:47:54: [INFO] Iterative Goto (2): RA diff = 1.15 arcsecs DE diff = 0.13 arcsecs
2017-12-27T03:47:52: [INFO] Iterative goto (1): slew mount to RA increment = 609, DE increment = 0
2017-12-27T03:47:52: [INFO] Iterative Goto (1): RA diff = 5.76 arcsecs DE diff = 0.13 arcsecs
2017-12-27T03:47:47: [INFO] Slewing to RA: 6:42:11 - DEC: 9:31:54
2017-12-27T03:47:47: [INFO] Slewing mount: RA increment = 26604, DE increment = -285
2017-12-27T03:47:47: [INFO] Starting Goto RA=6.70317 DE=9.53177 (current RA=6.92576 DE=7.53706)
2017-12-27T03:47:35: [INFO] Mount is unparked.
2017-12-27T03:47:35: [WARNING] Init() : Setting both ST4 guide rates to 0.5x (2)
2017-12-27T03:47:35: [WARNING] Init() : Setting default Init steps -- RAInit=8388608 DEInit = 8388608
2017-12-27T03:47:35: [WARNING] Init() : Motors already initialized
2017-12-27T03:47:35: [INFO] EQMod Mount is online.
2017-12-27T03:47:35: [INFO] Successfully connected to EQMod Mount.
I am getting disconnects happening that I cannot figure out. I am guiding using the internal guider (finally figured that out - other thread updated). After some time, in this case one 180s exposure in and one about 60s, the mount stops responding to guide commands and stops tracking. I go in to the INDI control panel and hit the disconnect button 2x, and then reconnect and it is back to working, thought the capture session needs to be set up again. Is this something new, or maybe just a cold stiff cable type issue that is pulling on a port? Would it be possible to trap and display the unrecognized error code to help debugging?
2017-12-27T03:55:31: [ERROR] Error when disconnecting mount -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error: -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error when disconnecting mount -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error: -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error when disconnecting mount -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [ERROR] Error: -> tty write failed, check connection: Error: unrecognized error code
2017-12-27T03:55:31: [INFO] EQMod Mount is offline.
2017-12-27T03:55:31: [ERROR] Error: -> tty read failed, check connection: Timeout error
2017-12-27T03:48:04: [INFO] Telescope slew is complete. Tracking TRACK_SIDEREAL...
2017-12-27T03:48:03: [INFO] Iterative Goto (1): RA diff = 1.48 arcsecs DE diff = 0.05 arcsecs
2017-12-27T03:48:02: [INFO] Slewing to RA: 6:41:56 - DEC: 9:39:37
2017-12-27T03:48:02: [INFO] Slewing mount: RA increment = 1678, DE increment = 3262
2017-12-27T03:48:02: [INFO] Starting Goto RA=6.69899 DE=9.66021 (current RA=6.85556 DE=7.52569)
2017-12-27T03:47:54: [INFO] Telescope slew is complete. Tracking TRACK_SIDEREAL...
2017-12-27T03:47:54: [INFO] Iterative Goto (2): RA diff = 1.15 arcsecs DE diff = 0.13 arcsecs
2017-12-27T03:47:52: [INFO] Iterative goto (1): slew mount to RA increment = 609, DE increment = 0
2017-12-27T03:47:52: [INFO] Iterative Goto (1): RA diff = 5.76 arcsecs DE diff = 0.13 arcsecs
2017-12-27T03:47:47: [INFO] Slewing to RA: 6:42:11 - DEC: 9:31:54
2017-12-27T03:47:47: [INFO] Slewing mount: RA increment = 26604, DE increment = -285
2017-12-27T03:47:47: [INFO] Starting Goto RA=6.70317 DE=9.53177 (current RA=6.92576 DE=7.53706)
2017-12-27T03:47:35: [INFO] Mount is unparked.
2017-12-27T03:47:35: [WARNING] Init() : Setting both ST4 guide rates to 0.5x (2)
2017-12-27T03:47:35: [WARNING] Init() : Setting default Init steps -- RAInit=8388608 DEInit = 8388608
2017-12-27T03:47:35: [WARNING] Init() : Motors already initialized
2017-12-27T03:47:35: [INFO] EQMod Mount is online.
2017-12-27T03:47:35: [INFO] Successfully connected to EQMod Mount.